CR-LF02
High Altitude Maintenance Lift
The high-altitude lights suspended in the gymnasium, factory buildings, stations, etc. are lowered to the ground through the remote control, which facilitates future maintenance and lamp replacement, eliminating the danger of working at height.
Easy Wireless Remote Control Suspension
The product can hang 8~50kg lamps, and the longest it can extend is up to 21M. The wireless remote control can control 32 sets of lifts at once, with the longest remote control distance of 50M. The high-altitude lights suspended in the gymnasium, factory buildings, stations, etc. are lowered to the ground through the remote control, which facilitates future maintenance and lamp replacement, eliminating the danger of working at great heights.
Product Features
- Use a safety factor of 5 times stainless steel cable, the longest it can be extended down is 21M.
- It can hang 8~50kg lamps, and the power supply of the lamps will be cut off automatically when it is lowered. It is safe and reliable during maintenance.
- When the lift is descending, if the item stops falling or reaches the ground, the lift automatically stops the lowering action.
- In the stop state, if the remote controller is not used for more than 10 minutes, the host will automatically enter the protection state, and the stop button of the remote controller can be used to release the protection state, and then the action of ascending and descending is performed.
- This machine uses a guide tube to fix the hanging luminaire to avoid swaying when it rises before the contact, and it can also make the elevator sway without being hit by strong winds at the top to ensure stability.
- Aluminum extruded material body, baking film thickness 50μm, surface with longitudinal groove design plus heat dissipation holes to increase heat dissipation, the shell is treated with weather-resistant paint.
- The elevator remote control can control 32 sets of lifts at most once, and the longest remote control distance is 50M.
- The high-altitude lights suspended in the gymnasium, factory buildings, stations, etc. are lowered to the ground through the remote control, which facilitates future maintenance and lamp replacement, eliminating the danger of working at height.
Light Source Specification
- Size: 384mm x 384mm x 358mm
- Net weight: 27kg
- Rated voltage: AC220V
- Lifting power: 50W
- Lifting height: Max 21M
- Average rate: rising and falling average rate ≦ 1.0m/min
- Maximum load: 50KG (above this load will be dangerous, not allowed to use)
- Minimum load: 8KG (below this load will not lift properly)
- Lift switch: 1 remote control 2 forced lift switch 3 external wiring control lift switch
Installation Suggestion
- It is recommended to use high-altitude lamps in stadiums, factories, stations, etc., to facilitate future maintenance and lamp replacement, eliminating the danger of working at height.
