LIGHTING MAINTENANCE LIFT

• Luminaire dimension          384 x 384 x 605 mm
• Net weight          27kg
• Lifting power          50W
• Lifting height               21M . Max
  
• Load                8KG~50KG
• Rated voltage               AC220V 60HZ    
• Average rising rate       ≦ 1.0M / min    
• Average falling rate       ≦ 1.0M / min    
• Number of remote controls                32 units
• Remote control distance                50M . Max  
• Support control system       DALI
  
•   
  

• Body bracket  Aluminum extrusion
• 
  

It uses stainless steel cable with a safety factor of 5 times and can be extended up to 21M.

It can hang 8~50kg lamps. The power of the lamps will be automatically cut off when lowered, making it safe and reliable during maintenance.

During the descending stroke of the lift, if there are objects blocking the descent or reaching the ground, the lift will automatically stop the descending action.

In the stopped state, if the remote control is not used for more than 10 minutes, the host will automatically enter the protection state. You can use the stop button on the remote control to release the protection state, and then perform the rising and falling actions.

This machine uses guide tubes to fix the suspended lamps to avoid shaking when ascending before contact. It also prevents the lift from shaking due to strong wind when it is at the top, ensuring stability.

The aluminum extruded material body has a paint film thickness of 50μm. The surface is designed with longitudinal grooves and heat dissipation holes to increase heat dissipation. The outer shell is treated with weather-resistant paint.

The elevator remote control can control up to 32 groups of elevators at a time, with a maximum remote control distance of 50M.

Use the remote control to lower the lamps suspended at high altitudes such as stadiums, factories, stations, etc. to the ground to facilitate future maintenance and lamp replacement, eliminating the danger of high-altitude operations.