.jpg)
LF01
LIGHTING MAINTENANCE LIFT
Introduction
LF01
LIGHTING MAINTENANCE LIFT
Wireless remote control suspension wizard is simple, easy and low risk
Use the remote control to lower the lamps suspended at high altitudes in stadiums, factories, stations, etc. to the ground to facilitate future maintenance and replacement of lamps and eliminate the danger of high-altitude operations.
Specifications
- Luminaire dimension Ø210 x 605 mm
- Net weight 6.5kg
- Lifting power 50W
- Lifting height 15M . Max
- Load 5KG~15KG
- Rated voltage AC220V 60HZ
- Average rising rate ≦ 2.0M / min
- Average falling rate ≦ 2.3M / min
- Number of remote controls 12 units
- Remote control distance 30M . Max
-
Material
- Ontology Aluminum extrusion
- Fixed ring Cast aluminum
Product features
High-strength steel wire rope can be extended up to 15M.
It can hang 5~15kg lamps. The power supply is completely cut off when the lamp is lowered, making it safe and reliable during maintenance.
The fixing screws of the lift body are all made of stainless steel to prevent rust and loosening.
The structural fixing ring is made of die-cast aluminum alloy to prevent the structure from loosening.
The power terminal block is dustproof.
The elevator remote control can control up to 12 elevators at a time, and the maximum remote control distance is 30M.
It is recommended to be used in high-altitude lighting fixtures such as gymnasiums, factories, stations, etc. to facilitate future maintenance and replacement of lighting fixtures and avoid the danger of high-altitude operations.
Installation method
Photos
References
